|
740 Series
|
|
This battery cap (universal assembly) covers the most commonly
used (USA) wing-nut style battery terminals. The top swivels to accommodate
cable direction. |
|
900 Series
|
|
The 900 Series covers cast-on lead terminals and is most
suitable for "after cabling" installation. This series is available
in right, left, and dual cable entries. |
|
500 Series
|
|
The 500 Series covers a maximum tapered post height of
0.98 in and works with a cable of a
maximum O.D. of 0.69 in. This series
is available in right, left, and dual cable entries. |
|
843 Series
|
|
The 843 Series is designed to cover a tapered post and terminal.
This series is available in right or left cable entries. |
|
458 Series
|
|
The 458 Series is typically used to cover a dual post battery
terminal. For complete protection against electrical hazards, use the
458 Series in combination with our 226 Series Cap. |
|
460 Series
|
|
The 460 Series is a dual post battery cap that specifically
fits the Exide Group 32 marine battery. This cap is typically used in
combination with a 226 Series cap. |
|
553 Series
|
|
The 553 Series is designed to cover a side post with a maximum
height of 0.4 in. |
|
430 Series
|
|
The 430 Series is designed to cover battery terminals with
a tapered post height up to a maximum of 0.83 in.
The cable entry is engineered to work with a cable O.D. up to
0.68 in. |
|
416 Series
|
|
The 416 Series is designed to cover battery terminals with
a tapered post height up to a maximum of 19.3mm [0.76"]. The cable
O.D. can be up to 16.0mm [0.63"]. The molded-in ring adds strength
to the cable entry. |
|
415 Series
|
|
The 415 Series is designed to cover battery terminals with
a tapered post height up to a maximum of 0.76 in.
The cable O.D. can be up to 0.63 in. |
|
417 Series
|
|
The 417 Series is a Snap-On Insulator typically used with
a repair terminal. This cap is designed to cover battery terminals with
a tapered post height up to a maximum of 0.91 in.
The cable O.D. shouldn't exceed 0.5 in. |
|
409 Series
|
|
The 409 Series is designed to cover battery terminals with
a tapered post height up to a maximum of 0.74 in.
The cable entry is engineered to work with a cable O.D. up to
0.5 in. |
|
466 Series
|
|
The 466 Series is designed to protect military spec battery
terminals. They are offered in left, right, and multiple cable entries.
Single cable entries up to 2/0 ga. |
|
468 Series
|
|
The 468 Series is designed to protect military spec battery
terminals. They are offered in left, right, and dual cable entries. The
cover snaps over the terminal and cable. Accepts cable size up to 4/0
ga. |
