|
310 Series
|
|
The 310 Series adds a finished look to any project. The
wide range of sizes within this grommet series is sure to fit your project
and add that professional touch. |
|
311 Series
|
|
The 311 Series adds a professional touch to seal off holes
of 1 in with a maximum cable O.D. of
0.8 in. This grommet can fit a panel
thickness up to 0.06 in. |
|
375 Series
|
|
The 375 Series was developed to be used with our bulkhead connector. They
offer 2 or 3 cable entry, of 2/0 to 4/0 ga cables. |
|
464 Series
|
|
The 464 Series is a circuit breaker cover that protects
the continually energized post on the circuit breaker from accidental
shorting. |
|
478 Series
|
|
The 478 Series is a grommet that fits a panel thickness
of 0.09 in and a panel opening of
1 in. The maximum
cable O.D. is 0.77 in. |
|
479 Series
|
|
The 479 Series is used to cover single or multiple
cables attached to a terminal post. It has an offset entry hole used to
remove connection screws without removing the main cable connections.
Available in two sizes and post hole only. |
|
550 Series
|
|
The 550 Series is designed to cover engine sensors. The
generous height and downward wire exit allows for "Low Profile"
assembly. The retainer lip keeps the cover in place. |
|
560 Series
|
|
The 560 Series is designed to cover engine sensors. The
generous height (1.83 in) and downward
wire exit allows for "Low Profile" assembly. Extra wall thickness provides
for added safety and protection. |
|
621 Series
|
|
The 621 Series is a small straight sensor cap. This cap
is designed to work with a 0.25 in maximum
O.D. cable. The molded-in ring allows for greater strength. The 621 Series is typically
used with oil pressure and water temperature sensors. |
|
725 Series
|
|
The 725 Series is our smallest tunnel cap series. Tunnel caps allow for
different inserts to fit different cables. Features include a test probe access, and
zip tie openings for securing the terminal insulator to the cable. |
|
729 Series
|
|
The 729 Series is our medium sized tunnel cap series. Tunnel caps allow for
different inserts to fit different cables. Features include a test probe access, and
zip tie openings for securing the terminal insulator to the cable. |
|
735 Series
|
|
The 735 Series is our largest tunnel cap series. Tunnel caps allow for
different inserts to fit different cables. Features include a test probe access, and
zip tie openings for securing the terminal insulator to the cable. |
|
795 Series
|
|
A unique insulator that will safely cover a
single cable joining multiple cables at one battery post or terminal.
Removable lid allows for quick and easy cable assembly. Lid has an attached
ring to slip over the single cable barrel. |
|
830 Series
|
|
The 830 Series is a cover for the 50 Amp Anderson or SMH
2 Pole battery connectors. This series is made of fire retardant, flexible
PVC. |
|
831 Series
|
|
The 831 Series is a cover for the 175 Amp Anderson or SMH
2 Pole battery connectors. This series is made of fire retardant, flexible
PVC. |
|
832 Series
|
|
The 832 Series is a cover for the 350 Amp Anderson or SMH 2
Pole battery connectors. This series is made of fire retardant, flexible
PVC. |
|
840 Series
|
|
The 840 Series is a small right angle sensor cap. The 840
permits a 0.25 in O.D. maximum cable size.
This series is typically used with oil pressure and water temperature sensors. |
|
956 Series
|
|
The 956 Series is designed to work with battery
arrays and with low profile terminals. The attached lid permits easy battery
testing or connection post assembly. |
